

















LOBOO Quick-Release Magnetic Motorcycle Tank Bag (BTB10PBK) for BMW R1250GS R1300GS, Honda Transalp Africa Twin, KTM ADV & More
The Perfect Fit Below. Built for Your Ride.
UNIVERSAL
Quick-Release Magnetic Motorcycle Tank Bag
The LOBOO BTB10PBK combines expandable storage with a six-point magnetic attachment system and dual locking mechanism. It attaches to a compatible adapter base for convenient removal at fuel stops, with front-to-rear adjustment to help position the bag around your motorcycle's controls.
Adapter base required: This bag does not mount directly to a bare fuel tank. Order the matching LOBOO adapter base for your exact motorcycle model and year together with the bag. The adapter base is a separate purchase.
Check Fitment and Steering Clearance Before Ordering
Select the base by exact model and year using the compatibility information, rather than by motorcycle brand alone. A base that fits one model is not automatically suitable for another.
The installation guide specifies at least 70mm (2.75in) between Point A, the handlebar mount center, and Point B, the fuel tank cap edge. Refer to the illustrated measurement below. Recheck clearance if handlebar risers move the bars rearward.
After mounting, check that steering is unrestricted throughout its full range and adjust the bag position if necessary. The 108mm adjustment range is not a guarantee of clearance on every motorcycle.

Magnetic Attachment and Quick Removal
Align the bag with the compatible magnetic base to attach it. For removal, pull rearward and lift upward when resistance is felt, following the illustrated product instructions. The quick-release design makes it convenient to remove the bag for refueling and carry it away from the motorcycle.
108mm Front-to-Rear Adjustment
Open the quick-release locking buckle, slide the magnetic base forward or backward to the desired position, then close the buckle to secure it. Check steering clearance again after adjustment.
Expandable, Shape-Retaining Storage
Open the expansion zipper when you need extra room. The semi-rigid construction helps the bag retain its shape, while 2520D ballistic nylon provides an abrasion-resistant exterior. Custom YKK zippers provide access to the compartments.
The top MOLLE panel and elastic bungee cord provide additional organization, and an internal zippered pocket helps separate small essentials. Reflective strips are positioned on the sides.

Cable Routing Port and Included Rain Cover
A cable pass-through allows a charging cable to run between the inside and outside of the bag. This is a cable opening, not a built-in power source.
A rain cover is included for use in wet weather. The cover is separate from the bag's outer fabric; do not treat the uncovered bag as a waterproof dry bag.


Product Specifications
| Model | LOBOO BTB10PBK |
|---|---|
| Length × Width | 29.2 × 22.5cm / 11.5 × 8.86in |
| Listed Height | 14.8cm / 5.83in; expandable design |
| Listed Weight | 908g / 2.0lb |
| Materials | 2520D ballistic nylon, EVA, polyester, PU and PVC |
| Front-to-Rear Adjustment | 108mm / 4.25in |
| Zippers | Custom YKK zippers |
| Included Accessories | Tank bag, rain cover, Summit sticker and vintage keychain |
| Required Mounting Accessory | Matching model-specific adapter base, purchased separately |
Original Illustrated Product Guide
See the original guide below for the attachment sequence, adjustment illustrations, construction details and product views. Use it together with the adapter compatibility and clearance information above.

Our warranty policy offers a standard one-year period; however, the specific terms and duration may differ based on your country or region. For complete details, please refer to our Warranty Information page or your local dealer.
installation guide
1-Sec Magnetic Release
108mm Clearance Tuning
Expandable & Form-Retaining
Pass-Through Charging














































































































