와이드 풋 페그

Frequently Asked Questions

Do LOBOO wide foot pegs replace my stock pegs, or go over them?

They bolt directly over your existing stock pegs — no removal required. LOBOO wide pegs use a lossless installation design that mounts over the OEM footrest without modifying or discarding it. This keeps installation simple, keeps the upgrade fully reversible, and means your original fold-up mechanism continues to work normally if your bike has one. Installation takes under 30 minutes with a basic socket set.

How much wider are LOBOO wide pegs compared to stock?

LOBOO wide pegs provide a significantly larger platform surface area than OEM pegs across all supported models. The exact dimensions vary by model, but the design priority is maximising the usable boot contact area while keeping the peg profile compact enough to avoid interfering with frame geometry or cornering clearance. The concave-convex grip surface also increases the effective grip area beyond what the raw dimensions suggest — your boot locks into the texture rather than resting on a flat plate.

Will wide foot pegs affect my cornering clearance?

LOBOO wide pegs are designed with ADV and touring bikes in mind, where lean angles are moderate and standing riding is a priority. The platform extension is engineered to stay within safe clearance margins for the supported models. If you ride a sportbike or frequently push maximum lean angles on track, wide pegs are not recommended for that use case — but for ADV, touring, and dual-sport riding, clearance is not a concern on any supported LOBOO model.

Are the pegs compatible with both rider and passenger footrests?

The LOBOO wide foot pegs in this collection are designed for rider footrests. Some models (such as the Honda GL1800) include options for passenger peg extensions — check the individual product listing for your model. The bolt-over installation design means fitment depends on the specific OEM peg geometry at each mounting position, which differs between rider and passenger locations on most bikes.

Can I use wide foot pegs with my existing bar risers?

Yes — wide foot pegs and handlebar risers are designed to work together and are in fact the most effective ergonomic combination for ADV riding. Risers bring your bars to the correct height for standing, and wider pegs give you the platform stability to actually stand comfortably. Many LOBOO riders install both in the same session. Neither upgrade affects the fitment or function of the other.

Do the pegs stay in place on muddy or wet trails?

Yes — the concave-convex surface pattern on LOBOO wide pegs is specifically designed to grip boot soles in wet and muddy conditions. The raised texture bites into the sole material from multiple angles, not just from directly below. This is the same grip principle used on dedicated enduro and off-road pegs, applied to a touring-friendly form factor that doesn't shred your boots on the daily commute.

What other upgrades pair well with wide foot pegs for off-road ADV riding?

The most impactful combination is wide foot pegs + handlebar risers — these two together fundamentally change how the bike feels when standing. For protection, add crash bars to guard the engine on technical terrain, and a kickstand extension to keep t