3 제품
HL08 Smart Electrochromic Helmet Visor – 0.01s Auto Tint, Anti-Fog & Anti-Scratch, Dual Mode Light-Sensing Shield for Most Helmets - LOBOO Smart Photochromic Helmet Visor - LOBOO
LOBOO R1X Motorcycle Helmet Headset - 45mm Speakers & CVC Noise Cancellation - LOBOO LOBOO R1X Motorcycle Helmet Headset - 45mm Speakers & CVC Noise Cancellation - LOBOO
LOBOO R1M Intercom – LOBOO Brand Overview LOBOO R1M Helmet Intercom Headset – CMT Mesh, 24-Rider Group – Main View
LOBOO X-TEAM Testing Project

설계도를 넘어. 야생으로.

X-Team

어떤 부품이든 작업장을 떠나기 전에 최종 테스트를 거칩니다. 이를 우리는 전담 X-Team이 주도하는 실제 환경 검증 과정이라고 부릅니다.

Frequently Asked Questions

What is the difference between electrochromic and photochromic helmet visors?

Photochromic visors use a chemical reaction triggered by UV light to darken — they respond slowly (3–5 seconds), don't work behind UV-blocking windscreens, and are ineffective in low-UV conditions like overcast days, tunnels, or at night. Electrochromic visors like the HL08 use a voltage-controlled optical layer activated by a light sensor, not UV. This means the HL08 responds in 0.01 seconds in any light condition — bright sun, tunnel entry, dappled forest light, or sudden high-beam glare at night — regardless of UV levels or windscreen blocking.

How long does the battery last between charges?

The HL08's built-in 120mAh lithium battery provides extended operation between charges — battery life varies depending on how frequently Auto Mode triggers tint adjustments, but for most riding conditions a full charge covers multiple full-day rides. The USB-C charging connection means you can top it up from the same charger as your phone or from your bike's USB power output. The HL08 can also be used in Manual Mode when the battery is low, conserving charge for tunnel and sudden-change scenarios where Auto Mode is most critical.

Does the HL08 work at night against oncoming headlights?

Yes — and this is one of the most practical advantages of electrochromic over photochromic technology. At night, there is no UV light for a photochromic lens to react to, so traditional tinting visors offer no protection against high-beam glare. The HL08's light sensor detects the intensity of visible light directly — including the sudden intense brightness of an oncoming high beam — and activates tinting in 0.01 seconds to reduce glare. In Manual Mode, you can pre-set the tint level for night riding to provide consistent anti-glare protection.

Will the adhesive mount damage my helmet visor?

No — the HL08 uses a damage-free adhesive mount designed to attach and remove without leaving marks on the visor surface. It is repositionable, allowing you to adjust placement for optimal sensor positioning, and fully removable if you change helmets or want to transfer the unit. The adhesive is designed for curved helmet visor surfaces. For best results, clean the visor surface before installation and allow 24 hours for the adhesive to fully cure before riding.

Does it work in Auto Mode behind a tinted or UV-protected windscreen?

Yes — unlike photochromic visors that fail behind UV-blocking windscreens, the HL08 uses a visible-light sensor rather than a UV trigger. A tinted or UV-coated windscreen reduces the light reaching the sensor slightly, but the HL08 detects the change in visible light intensity and adjusts tint accordingly. Riders on enclosed or semi-enclosed ADV bikes with large windscreens should be aware that the sensor reads the light environment behind the screen — which is the relevant environment for their vision — rather than the raw ambient light outside.

Can I switch between Auto and Manual mode without removing my gloves?

Yes — mode switching is designed for gloved use. A long-press on the control button toggles between Auto Mode and Manual Mode. In Manual Mode, a single press cycles through available tint levels. Both actions are confirmed with an indicator light, so you can operate the visor without looking at it directly. The button profile and size are optimised for ADV gloves rather than thin sport gloves, but the long-press action works reliably with most motorcycle glove types.

What other LOBOO products pair well with the HL08 for night and low-light riding?

The HL08 manages what you see through your visor; LOBOO auxiliary lights manage what the road ahead looks like. Running both simultaneously gives you the complete low-light riding package: external illumination from 15,000–21,000lm auxiliary lights, and dynamic tint protection from oncoming high beams and sudden light changes through the HL08. For navigation in reduced visibility conditions, a LOBOO anti-vibration phone holder keeps your map readable without needing to adjust your gaze significantly.

오토바이 헬멧 인터콤, 블루투스 헤드셋 및 액세서리

단체 주행 중에도 연결을 유지하고, 내비게이션과 음악을 들으며, LOBOO 헬멧 전자 제품과 액세서리로 헬멧 장비를 업그레이드하세요. R1M 메시 인터콤, R1X 블루투스 헬멧 헤드셋, HL08 전자식 틴트 조절 바이저 인서트를 살펴보세요. 일부 제품 옵션에서는 마운트와 오디오 액세서리도 이용할 수 있습니다.

단체 주행용 R1M 메시 헬멧 인터콤

LOBOO R1M 오토바이 헬멧 인터콤은 단체 음성 통신과 블루투스 연결, 45mm 스피커, 회전식 볼륨 조절 기능을 결합했습니다. 메시 그룹 인터콤은 휴대전화 신호 없이 작동합니다. 라이딩 그룹과 헬멧 구성에 맞춰 1개, 2개, 4개 세트 또는 표시된 액세서리 옵션 중에서 선택하세요.

통화와 음악 감상을 위한 R1X 블루투스 헬멧 헤드셋

LOBOO R1X 헬멧 헤드셋은 블루투스 오디오, 45mm 스피커, 전화 통화 시 CVC 소음 제거 기능을 제공합니다. R1M의 메시 그룹 인터콤보다 음악과 연결된 휴대전화의 오디오를 원하는 라이더에게 적합한 옵션입니다. 일부 번들에는 헬멧에서 분리해 사용할 수 있는 HR1 오버이어 마운트가 포함됩니다.

HL08 전자식 틴트 조절 바이저 인서트

LOBOO HL08 바이저 인서트는 호환되는 헬멧 바이저에 광량 감지 자동 틴트 조절 및 수동 틴트 조절 기능을 더합니다. 접착식으로 설치하고 USB-C로 충전할 수 있어 통신 장비와 별도로 헬멧을 업그레이드할 수 있습니다. 선택하기 전에 인서트 치수와 바이저 모양이 맞는지 확인하세요.

헬멧 마운트 및 오디오 액세서리

R1M 및 R1X에 표시된 액세서리 옵션 중 제공되는 HR1 오버이어 헤드셋 마운트와 R1LC 스피커 커버를 살펴보세요. 액세서리 단품 옵션, 헤드셋 키트, 번들마다 구성품이 다릅니다. 각 옵션이 헤드셋 모델에 맞는지 확인하고, 제품 페이지에서 포함된 구성품을 확인하세요.