바 라이저즈

Frequently Asked Questions

Will LOBOO bar risers fit my bike without extending the cables?

For most models, yes. LOBOO bar risers are engineered to a specific rise height that stays within the slack range of factory brake lines, clutch cables, and throttle cables — so you get the ergonomic benefit without the cost and hassle of cable extensions. Each product listing confirms whether cable extensions are needed for that specific model. If you're installing the BMW R1300GS or KTM 790/890 ADV risers, the 19mm rise is cable-safe on virtually all configurations.

What is the difference between rise and setback on handlebar risers?

Rise is how much the risers lift your bars vertically — bringing your hands up. Setback (also called pullback or rearward offset) moves the bars closer to you horizontally, reducing the reach to the grips. LOBOO risers combine both dimensions, so you're not just going taller — you're moving into a more natural rider triangle. This is especially important for ADV bikes where you frequently switch between seated and standing riding positions.

Do bar risers affect my motorcycle's handling?

A well-fitted set of bar risers in the 19–30mm range has minimal impact on handling for ADV and touring bikes. The change in leverage is slight and most riders report improved control — particularly when standing off-road — because they can hold the bars with relaxed arms rather than locked, fatigued ones. LOBOO's model-specific fitment ensures the geometry change is within safe parameters for your frame. Avoid risers that are excessively tall (50mm+) on bikes that see high-speed road use, as these can reduce front-end feedback.

How long does it take to install handlebar risers?

Most installations take 20–45 minutes with a basic socket set and torque wrench. LOBOO risers use your bike's original mounting bolts and reference markings, so there's no guesswork on alignment. The trickiest part is usually re-routing cables and throttle bodies after the height change — allow extra time on your first install to do this carefully. A full installation guide is included with every set.

Can I fit handlebar risers alongside other cockpit accessories?

Yes — LOBOO bar risers are designed to work alongside your existing cockpit setup. They don't interfere with instrument clusters, windscreens, or GPS mounts in most configurations. If you're running a phone mount or navigation system, check that bar-end clearance is maintained after raising the bars. The precision alignment markings also make it easy to reset any accessories that were clamped to the original bar position.

Are LOBOO bar risers reversible? Can I go back to stock?

Yes, completely. LOBOO bar risers use a lossless installation design — they mount over your factory clamp positions using the original hardware, with no permanent modifications to your bike's frame, triple clamp, or wiring. Removing them is as straightforward as installing them. This also makes them ideal if you're testing ergonomics before committing to a full handlebar swap.

What other accessories pair well with bar risers on an ADV bike?

Bar risers are usually the first ergonomic upgrade ADV riders make — but they work best as part of a complete cockpit setup. We recommend pairing them with anti-vibration phone mounts for stable navigation, LED auxiliary lights mounted via your crash bar for improved trail visibility, and crash bars to protect the engine when the improved standing posture leads you further off-road than you planned.