
เกินกว่าภาพร่าง สู่ธรรมชาติอันดุร้าย
X-Team
ก่อนที่ชิ้นส่วนใดจะออกจากเวิร์กช็อปของเรา จะต้องผ่านการทดสอบอย่างเข้มงวด นี่คือกระบวนการที่เราเรียกว่า การตรวจสอบในสภาพแวดล้อมจริง ซึ่งดำเนินการโดย X-Team ที่ทุ่มเทของเรา
Frequently Asked Questions
What is the difference between electrochromic and photochromic helmet visors?
Photochromic visors use a chemical reaction triggered by UV light to darken — they respond slowly (3–5 seconds), don't work behind UV-blocking windscreens, and are ineffective in low-UV conditions like overcast days, tunnels, or at night. Electrochromic visors like the HL08 use a voltage-controlled optical layer activated by a light sensor, not UV. This means the HL08 responds in 0.01 seconds in any light condition — bright sun, tunnel entry, dappled forest light, or sudden high-beam glare at night — regardless of UV levels or windscreen blocking.
How long does the battery last between charges?
The HL08's built-in 120mAh lithium battery provides extended operation between charges — battery life varies depending on how frequently Auto Mode triggers tint adjustments, but for most riding conditions a full charge covers multiple full-day rides. The USB-C charging connection means you can top it up from the same charger as your phone or from your bike's USB power output. The HL08 can also be used in Manual Mode when the battery is low, conserving charge for tunnel and sudden-change scenarios where Auto Mode is most critical.
Does the HL08 work at night against oncoming headlights?
Yes — and this is one of the most practical advantages of electrochromic over photochromic technology. At night, there is no UV light for a photochromic lens to react to, so traditional tinting visors offer no protection against high-beam glare. The HL08's light sensor detects the intensity of visible light directly — including the sudden intense brightness of an oncoming high beam — and activates tinting in 0.01 seconds to reduce glare. In Manual Mode, you can pre-set the tint level for night riding to provide consistent anti-glare protection.
Will the adhesive mount damage my helmet visor?
No — the HL08 uses a damage-free adhesive mount designed to attach and remove without leaving marks on the visor surface. It is repositionable, allowing you to adjust placement for optimal sensor positioning, and fully removable if you change helmets or want to transfer the unit. The adhesive is designed for curved helmet visor surfaces. For best results, clean the visor surface before installation and allow 24 hours for the adhesive to fully cure before riding.
Does it work in Auto Mode behind a tinted or UV-protected windscreen?
Yes — unlike photochromic visors that fail behind UV-blocking windscreens, the HL08 uses a visible-light sensor rather than a UV trigger. A tinted or UV-coated windscreen reduces the light reaching the sensor slightly, but the HL08 detects the change in visible light intensity and adjusts tint accordingly. Riders on enclosed or semi-enclosed ADV bikes with large windscreens should be aware that the sensor reads the light environment behind the screen — which is the relevant environment for their vision — rather than the raw ambient light outside.
Can I switch between Auto and Manual mode without removing my gloves?
Yes — mode switching is designed for gloved use. A long-press on the control button toggles between Auto Mode and Manual Mode. In Manual Mode, a single press cycles through available tint levels. Both actions are confirmed with an indicator light, so you can operate the visor without looking at it directly. The button profile and size are optimised for ADV gloves rather than thin sport gloves, but the long-press action works reliably with most motorcycle glove types.
What other LOBOO products pair well with the HL08 for night and low-light riding?
The HL08 manages what you see through your visor; LOBOO auxiliary lights manage what the road ahead looks like. Running both simultaneously gives you the complete low-light riding package: external illumination from 15,000–21,000lm auxiliary lights, and dynamic tint protection from oncoming high beams and sudden light changes through the HL08. For navigation in reduced visibility conditions, a LOBOO anti-vibration phone holder keeps your map readable without needing to adjust your gaze significantly.
อุปกรณ์เสริมหน้ากากหมวกกันน็อกอัจฉริยะ — คู่มือการมองเห็นแบบอิเล็กโทรโครมิก
หน้ากากหมวกกันน็อกแบบโฟโตโครมิกแบบดั้งเดิมเปลี่ยนสีผ่านปฏิกิริยาเคมีที่ถูกกระตุ้นโดยแสงยูวี ซึ่งเหมาะกับถนนมอเตอร์เวย์ที่มีแสงแดดจ้า แต่ไม่ทำงานในอุโมงค์ ใต้ร่มไม้ ในสภาพอากาศครึ้ม หรือในเวลากลางคืนเมื่อไฟสูงจากรถสวนทางส่องตรงมา LOBOO HL08 ใช้เทคโนโลยีที่แตกต่างอย่างสิ้นเชิง — การเปลี่ยนสีแบบอิเล็กโทรโครมิก ควบคุมโดยเซ็นเซอร์แสงอิเล็กทรอนิกส์แทนการสัมผัสกับแสงยูวี ผลลัพธ์คือการตอบสนองการเปลี่ยนสีในเวลา 0.01 วินาทีในทุกสภาพแสง ทั้งแบบอัตโนมัติและแบบแมนนวล ไม่ว่าจะมีแสงแดดหรือไม่ก็ตาม ตัวอุปกรณ์ติดตั้งกับหน้ากากหมวกกันน็อกแบบเต็มใบส่วนใหญ่ได้โดยไม่ทำให้เกิดความเสียหาย น้ำหนักเพียง 30 กรัม และชาร์จไฟผ่าน USB-C
อิเล็กโทรโครมิก vs. โฟโตโครมิก — ทำไมเทคโนโลยีนี้จึงสำคัญ
ความแตกต่างนี้ไม่ใช่แค่การตลาด — แต่เปลี่ยนแปลงสิ่งที่หน้ากากหมวกกันน็อกสามารถและไม่สามารถทำได้ในสภาพการขับขี่จริง เลนส์โฟโตโครมิกใช้ผลึกซิลเวอร์ฮาไลด์ที่เข้มขึ้นเมื่อสัมผัสกับรังสียูวี ซึ่งหมายความว่ามันตอบสนองช้า (3–5 วินาที) ไม่ทำงานอย่างมีประสิทธิภาพหลังจากกระจกบังลมที่บล็อกแสงยูวี และจะไม่เปลี่ยนสีในสภาพแวดล้อมมืดเพราะไม่มีตัวกระตุ้นยูวี เทคโนโลยีอิเล็กโทรโครมิกใช้ชั้นออปติคัลที่ควบคุมด้วยแรงดันไฟฟ้าเพื่อตอบสนองสัญญาณไฟฟ้าจากเซ็นเซอร์แสง — ไม่ใช่ยูวี HL08 ตรวจจับความเข้มของแสงโดยรอบโดยตรงและปรับสีใน 0.01 วินาที ไม่ขึ้นกับระดับยูวี ไม่ขึ้นกับกระจกบังลม และไม่ขึ้นกับว่าคุณกำลังขี่เข้าสู่แสงแดดหรือออกจากอุโมงค์มืด
คุณสมบัติหลักของ HL08
- ตอบสนองการเปลี่ยนสีใน 0.01 วินาที — เร็วกว่าหน้ากากโฟโตโครมิกทั่วไปถึง 300 เท่า เข้าออกอุโมงค์ด้วยความเร็วโดยไม่มีช่วงเวลามืดนานเป็นวินาทีที่อันตราย
- ควบคุมสองโหมด — โหมดอัตโนมัติ: เซ็นเซอร์แสงในตัวตรวจจับความสว่างอย่างต่อเนื่องและปรับสีโดยอัตโนมัติ โหมดแมนนวล: กดค้างเพื่อล็อก จากนั้นแตะเพื่อเปลี่ยนระดับสีตามต้องการ สลับโหมดได้โดยไม่ต้องถอดถุงมือ
- เคลือบกันฝ้าแบบไฮโดรโฟบิก — ชั้นไฮโดรโฟบิกภายนอกกันน้ำฝนและลดการเกิดฝ้าในสภาพเย็นหรือชื้น การออกแบบภายในทนรอยขีดข่วนและป้องกันเศษหินบนถนน
- ติดตั้งได้กับหมวกกันน็อกแบบไม่ต้องเจาะน้ำหนัก 30 กรัม — ติดด้วยกาวที่หน้ากากหมวกกันน็อกแบบเต็มใบส่วนใหญ่โดยไม่ต้องเจาะหรือดัดแปลงถาวร น้ำหนักเพียง 30 กรัม ไม่เพิ่มน้ำหนักที่รู้สึกได้ สามารถย้ายตำแหน่งหรือนำออกได้หากเปลี่ยนหมวกกันน็อก
- ชาร์จไฟผ่าน USB-C — แบตเตอรี่ลิเธียมในตัวความจุ 120mAh ชาร์จผ่าน USB-C ไม่มีแบตเตอรี่ใช้แล้วทิ้ง ไม่มีสายชาร์จเฉพาะ อุณหภูมิใช้งาน −20°C ถึง +50°C
- ป้องกันรังสียูวี — กรองรังสียูวีเพิ่มเติมจากการเปลี่ยนสีแสงที่มองเห็น ปกป้องดวงตาของคุณในขณะขี่กลางวันนาน ๆ โดยไม่ต้องพึ่งพายูวีเป็นตัวกระตุ้นการเปลี่ยนสี
เมื่อไหร่ที่ HL08 สร้างความแตกต่างมากที่สุด?
สถานการณ์ที่เวลาตอบสนองของอิเล็กโทรโครมิกสำคัญที่สุดคืออุโมงค์และการเปลี่ยนแปลงแสงอย่างกะทันหัน ที่ความเร็ว 80 กม./ชม. การหน่วงเวลาการเปลี่ยนสี 3 วินาทีขณะเข้าสู่อุโมงค์มืดหมายถึงการมองเห็นที่บกพร่องเป็นระยะทาง 67 เมตร การตอบสนอง 0.01 วินาทีของ HL08 ครอบคลุมระยะทางนี้ในไม่ถึง 25 เซนติเมตร สำหรับผู้ขี่บนถนนภูเขา เส้นทางป่าแสงสลับซับซ้อน เส้นทางในเมืองผ่านอุโมงค์ หรือการขี่กลางคืนที่ไฟสูงสวนทางเป็นเรื่องปกติ ความแตกต่างนี้มีความสำคัญจริงจังมากกว่าการเป็นแค่ข้อมูลทางเทคนิค
หมวกกันน็อกที่รองรับ
ฐานติดกาวของ HL08 ออกแบบมาให้เข้ากันได้กับหมวกกันน็อกมอเตอร์ไซค์แบบเต็มใบส่วนใหญ่ในตลาด ระบบติดตั้งแบบไม่ต้องเจาะและไม่ทำลายนี้ใช้งานได้กับพื้นผิวหน้ากากที่โค้งและเรียบ ตรวจสอบรายละเอียดในรายการสินค้าเพื่อคำแนะนำเกี่ยวกับรูปทรงหมวกกันน็อก — หมวกที่มีพื้นผิวหน้ากากโค้งลึกหรือเล็กมากอาจต้องประเมินก่อนซื้อ HL08 เข้ากันได้อย่างลงตัวกับระบบการมองเห็นที่กว้างขึ้นของ LOBOO: ไฟเสริม LED สำหรับการส่องสว่างภายนอก และ ที่ยึดโทรศัพท์ สำหรับการนำทาง — ครอบคลุมทุกมิติของความปลอดภัยในการขี่กลางคืนและในสภาพแสงน้อย


