อุปกรณ์ขับขี่มอเตอร์ไซค์อเนกประสงค์

Frequently Asked Questions

What diameter crash bars do the bumper pads fit?

The LOBOO crash bar bumper pads are universally compatible with 22mm and 25mm diameter crash bar tubing — the two most common sizes across ADV and touring motorcycles from BMW, KTM, Honda, Suzuki, and most other manufacturers. The non-slip inner surface grips curved pipe sections without slipping, and the three-piece modular design means individual components can be replaced if one section wears out. Installation and removal require no tools and take under two minutes per pad.

Can the drink holder hold anything other than water bottles?

Yes — the LOBOO CSHJ-1 drink holder accommodates any cylindrical container between 58–78mm in diameter, which includes standard 500ml and 1L water bottles, hydration flasks, fuel bottles, and small fire extinguishers (as listed in the product). The elastic strap system adjusts across the full diameter range via three preset positions. For containers on the heavier end of the range, the 25mm crash bar mounting position provides the most vibration-stable base — side pannier mounts can flex more on rough terrain.

Is the tool box truly waterproof, or just splash-resistant?

The LOBOO CGJX-1 tool box is designed for genuine waterproof performance — suitable for rain riding and moderate water crossings, not just splash protection. The sealed construction prevents water ingress during sustained wet conditions. For deep river crossings or submersion, additional sealing precautions are advisable — but for the rain, mud, and stream crossings that characterise typical ADV touring, the box keeps your contents dry without requiring a dry bag inside.

Is the tool box lock compatible with LOBOO aluminum cases?

Yes — the LOBOO CGJX-1 uses the same key system as LOBOO's aluminum pannier cases. If you're already running LOBOO cases on your bike, the tool box integrates into the same one-key setup, which means one fewer key to carry and one less thing to lose on a remote trail. This unified lock system is a deliberate design choice across LOBOO's luggage and accessory range.

Which pannier racks is the tool box compatible with?

The CGJX-1 tool box is designed for standard 18mm round tube pannier racks and adjusts across a width range of 212–262mm to accommodate most aftermarket and OEM rack widths. It is explicitly compatible with GIVI and Touratech rack systems, which cover the majority of ADV bikes running aftermarket racks. If you're running a different rack brand, measure your rack tube diameter and width before ordering — if it falls within the 18mm / 212–262mm parameters, the box will fit.

Do I need any tools to install these accessories?

The crash bar bumper pads and drink holder both use tool-free installation with clip and buckle mechanisms that take under two minutes each. The tool box uses a simple strap-and-clamp system that can be hand-tightened onto the rack tubing — a screwdriver may be needed to secure the final tightening bolt depending on your rack profile, but no specialist tools are required. All three accessories ship with any required hardware and brief installation instructions.

What else should I add to complete a long-distance ADV touring setup?

For a complete functional touring build that complements these universal accessories: crash bars provide the mounting surface for the drink holder and the bumper pads, while also protecting the engine; side bags or aluminum panniers provide the rack the tool box mounts to. On the electronics side, phone holders handle navigation and auxiliary lights extend your usable riding hours into dawn and dusk. For comfort and control, handlebar risers and wide foot pegs round out the ergonomics setup.