LOBOO Verified Fitment

HUSQVARNA ノルデン 901 Accessories, Racks & Protection

67Fit this bike
6Categories

Shop by Ride

Year & version follow the model name; confirm against your actual bike.

Modification Parts

Fits this bike

Electronics

View all →

Cases & Racks

Fits this bike

Wearables

View all →

Husqvarna Norden 901用アクセサリー — 購入ガイド

LOBOOは、より洗練されたツーリング重視のパッケージに包まれたKTM 890のアドベンチャーDNAを求め、スウェーデンオレンジの選択肢を選んだライダーのために、Husqvarna Norden 901用アクセサリーを製造しています。Norden 901はKTM 790/890 Adventureとプラットフォームを共有しているため、LOBOOのアクセサリーは実績のあるKTMプラットフォーム向けフィッティング技術を活用しながら、Nordenのジオメトリーとマウント構造に合わせて個別にテスト・検証されています。

Norden 901にLOBOOを選ぶ理由

Norden 901がKTMプラットフォームを共有していることで、ライダーはアクセサリー開発が最も進んだアドベンチャーバイク用アーキテクチャの一つによるメリットを得られます。LOBOOのNorden 901用クラッシュバーは、KTM 790/890 Adventure向けに開発された、実戦で鍛えられたブラック&オレンジのローワーエンジンガードシステムと同じものです。出荷前には、X-Teamが20万km以上にわたって実環境で検証しています。PIKE TRACKERサイドケースシステムは、2023年以降のNorden 901のマウントジオメトリー専用に設計されており、19mmのハンドルバーライザーは、快適性とケーブルの届く範囲のバランスが最適になるよう設計されています。

  • KTMプラットフォームに基づく高精度フィッティング — Norden 901のフレーム構造に正確に合わせて設計。共通プラットフォームのメリットにより、成熟した十分にテスト済みのフィッティング基盤を実現しています。
  • PIKE TRACKERアルミケース — IPX7等級のハードパニアケース。クイックリリースマウントを備え、Norden 901(2023年以降)のラックシステム専用に設計されています。
  • ケーブルに配慮した19mmハンドルバーライザー — 19mmの高さに特化して設計されており、純正仕様の多くの車両では、ブレーキラインやクラッチケーブルを延長せずにハンドルバーを高くできます。

対応するHusqvarnaモデル

このコレクションのLOBOOアクセサリーは、Husqvarna Norden 901(2023年以降)向けに設計されています。複数の製品はKTM 790/890 Adventureプラットフォーム全体にも対応しています。共通プラットフォーム向けフィッティングの全ラインアップについては、KTMコレクションをご覧ください。上のメーカー/モデル/年式セレクターを使用して、お客様の車両仕様との適合性をご確認ください。

Norden 901を完成させる

まずはローワーエンジンガードで、トレイル走行時に露出したNordenのシリンダーヘッドを保護しましょう。次にPIKE TRACKERパニアシステムを追加すれば、長距離ツーリングでハードラゲッジを使用できます。GPSマウントがナビゲーションを視界内にしっかり固定し、サイドスタンドエクステンションが積載したNordenを軟弱な地面でも安定させます。さらに、インフレータブルクラッシュバーバッグを追加すれば、エンジンガードに直接IPX7等級のトレイル用収納スペースを確保できます。

Frequently Asked Questions

Are LOBOO accessories made for the Norden 901 specifically, or are they KTM parts that also fit?

Both. The Norden 901 shares its frame and engine architecture with the KTM 790/890 Adventure, so several LOBOO accessories are validated on both platforms — including the crash bars, bar risers, GPS mount, and side stand extension. The PIKE TRACKER side cases are purpose-built specifically for the Norden 901 (2023+) mounting points. All products listed in the Norden 901 collection have confirmed fitment on the Norden regardless of shared architecture.

Do LOBOO's 19mm bar risers require brake line extensions on the Norden 901?

No — the 19mm height was specifically chosen because it sits within the slack limits of the Norden 901's factory cables on most stock builds. This means you get a meaningful ergonomic improvement for standing off-road posture without the cost and complexity of replacing brake lines or clutch cables. If your Norden has aftermarket handlebars or non-standard cable routing, extensions may be needed — check cable reach before finalizing installation.

Are LOBOO crash bars compatible with the Norden 901's OEM cylinder head covers?

Yes. LOBOO's lower engine guards for the Norden 901 are designed to mount using OEM frame points without modifying or removing the factory cylinder head covers. The guards wrap around the exposed cylinder head area — the primary impact zone in a tip-over — and are compatible with the KTM/Husqvarna platform's standard mounting hardware.

Will the PIKE TRACKER panniers fit the Norden 901's stock pannier rack?

LOBOO's PIKE TRACKER system for the Norden 901 (2023+) is engineered to work with the model's OEM pannier rack mounting architecture. No aftermarket rack is required for installation. If you're running an aftermarket rack, verify compatibility with the product listing before ordering — different rack brands use different mounting interfaces.

What's the difference between the Norden 901 accessories and KTM 890 Adventure accessories from LOBOO?

For shared-platform products (bar risers, side stand extension, GPS mount, and crash bars), the fitment is identical — both the Norden 901 and KTM 790/890 Adventure use the same frame geometry and mounting points for these accessories. The KTM collection and Norden 901 collection will show the same product listed with both fitment notes. For the PIKE TRACKER pannier system, there are model-specific variants — select the Norden 901 version for the correct mounting geometry.

Is LOBOO a trustworthy brand for Husqvarna accessories?

LOBOO builds to the same engineering and X-Team validation standards for Husqvarna as for BMW, KTM, and Ducati. Every Norden 901 product goes through real-world field testing — not just bench fitment checks — before going on sale. We don't add products to the catalog that haven't proven themselves on the road. Read more on the About Us page.